Alternator for Denso
Zhejiang Magneto Electromotor Co. , Ltd is one of biggest parts producer and exporter in China, as well as professional service supplier. As the fast development, and experienced and professional team formed, the scale of production is gradually expanding.
Strong Development Capacity
We have developed over 1500 new units in the pass 10 years and are continuing to add new part numbers every month.
High Quality
All of our products have passed strict testing and passed TS16949 quality certification.
Accept ODM/OEM Service
We support OEM&DDM service, can better meet the customers.
Strong Productivity
Our factory has more than 300 machines, with strong productivity and stable supply capacity.
Wide Market
Our products are sold in America, Europe, Southeast Asia, and other regions. We are working to expand our aftermarket.
Parameter
|
Type |
Alternator, 12v, 120A |
|
Voltage (V) |
12 |
|
Rotation |
CW |
|
Pulley Type |
Fixed |
|
Warranty |
12 months |
12V Alternator For Denso
Designed to produce 12 volts, which is standard for most automotive electrical systems. Commonly used in a variety of vehicles, including cars, trucks, and motorcycles.
80A Alternator For Denso
An 80A alternator for Denso refers to a Denso brand alternator that has a rated output of 80 amps. The 80A rating indicates that the alternator can provide up to 80 amps of electrical current, which is suitable for vehicles with moderate electrical demands.
Alternator Installation Steps (Alternator For Denso)
● Physically compare the new alternator to the original. Compare the housing and pulley offsets, pulley size and type, pivot and adjustment hole locations, wire connector locations and terminal configurations with the original alternator.
● Install the mounting bracket(s) but do not completely tighten the bolts yet.
● Support the alternator and fasten it into position but do not completely tighten the bolts yet.
● Install the drive belt. If the drive belt is worn, stretched, cracked, oily or glazed, it should be replaced.
● Set the belt tension while tightening the mounting and adjusting bolts. Be sure to set the belt tension and torque the mounting bolts to the vehicle manufacturer’s recommended specifications.
● CAUTION: Do not pry or hit the alternator housing to adjust the belt tension.
● Check the drive belt alignment between the alternator pulley and other drive pulleys. Ensure there is no interference between the drive belt and other components.
● Reconnect the wire connector to its proper location on the alternator. Ensure there is no interference between the wire harness and other components.
● Reinspect all components. Ensure that threaded fasteners are properly torqued and there is no interference between components.
● Reconnect the battery negative cable.
● Start the engine. Let it for 5 minutes to accustom the drive belt. Re-adjust the drive belt using the ‘used’ tension specification.
● Turn the engine off and re-inspect again.
● Re-test the charging system to verify that it is performing according to the vehicle manufacturer’s specifications.
● Identify each wire connection and note the location of each on the alternator.
● Disconnect the wires from the alternator.
● Loosen the alternator pivot bolt but do not remove the bolt yet.
● Loosen the tension assembly’s lock nut or bolt and turn the adjustment bolt so that drive belt tension is reduced far enough to allow belt removal. Some vehicles may be equipped with an automatic, spring-loaded tensioner. Rotate the spring-loaded tensioner using the appropriate tool far enough to allow drive belt removal.
● Remove the drive belt from the alternator.
● Support the alternator and remove the bolts holding the alternator in place. Set the bolts and alternator aside. Be sure to note bracket orientation and fastener length/location before removing the alternator.
● Inspect the condition of the wiring and connectors. Inspect for worn wire ends, continuity, loose or broken connectors, corrosion and pliability. Repair or replace as necessary.
Precautions for Using Alternator For Denso
To prevent damage to the alternator and regulator, the following precautionary measures must be taken when working with the electrical system.
If the battery is removed for any reason, make sure it is reconnected with the correct polarity. Reversing the battery connections may result in damage to the one-way rectifiers.
When utilizing a booster battery as a starting aid, always connect the positive to positive terminals and the negative terminal from the booster battery to a good engine ground on the vehicle being started.
Never use a fast charger as a booster to start vehicles.
Disconnect the battery cables when charging the battery with a fast charger.
Never attempt to polarize the alternator.
Do not use test lights of more than 12V when checking diode continuity.
Do not short across or ground any of the alternator terminals.
The polarity of the battery, alternator and regulator must be matched and considered before making any electrical connections within the system.
Never separate the alternator on an open circuit. Make sure all connections within the circuit are clean and tight.
Disconnect the battery ground terminal when performing any service on electrical components.
Disconnect the battery if arc welding is to be done on the vehicle.
Inquiry-Professional quotation.
Confirm the price, lead time, packing requirement, payment term etc.
Customer make the payment for deposit and send us Bank receipt.
Will inform client that we have got the payment, arrange the production & inform the estimated time.
End Production-Mass production products photos for approval. You can also arrange the third party Inspection.
Clients make payment for balance and BEE Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term. Inform the tracking number and check the status for clients.
Order can be say "finish" when you receive the goods and satisfy with them.
Feedback to BEE about Quality, Service, Market Feedback & Suggestion. And we can do better.
Packing And Shipping
|
Package |
● For original, it is original packge box; for aftermarket, it is brown or white box ● Customized packing |
|
Delivery way |
DHL/FEDEX/UPS/TNT,By Air, By Sea |
|
FOB port |
Shanghai, Ningbo, Guangzhou etc. |
|
Delivery time |
For goods in stock, it is 1-5 working days; for good not in stock, it is 8-15 working days. |
Our Quality Control
Material Control
The materials of our products are strictly controlled and are made of high-quality materials. For example, gears, bearings, rotors and other components are usually made of special metal materials that are resistant to high temperatures and wear.
Quality Management Of The Production Process
Our factory follows ISO 9001 or similar quality management standards to ensure that the quality of products is strictly controlled from design, production to after-sales service.
Motor Performance Test
After production, we will conduct a comprehensive electrical performance test on the motor part of the starter, including voltage, current, current fluctuation, power and efficiency.
Mechanical Component Inspection
Our quality inspection team will check the tooth shape, hardness, surface finish of the gears and the rolling accuracy of the bearings.
Durability Test
We will perform high-temperature cycle tests on all electrical and mechanical components, and simulate vibration and impact tests to ensure that the components will not loosen, wear or fail during long-term vibration.
Environmental Adaptability Test
Generally, all starters need to pass salt spray tests, moisture and waterproof tests; and we will start the motor and mechanical components of the starter in a low-temperature environment to check the antifreeze performance of the starter.
We have the registered capital 15 Million, and the factory area is 23000m2. There are 200 employees, including 32 engineers, 6 R&D persons whose has Bachelor degree and above.
FAQ
Find professional alternator for denso manufacturers and suppliers in China here. Please feel free to buy or wholesale bulk alternator for denso made in China at cheap price from our factory.
12V Alternator For Denso, 80A Alternator For Denso