1. Firstly, because the cable is installed in the unit where the equipment needs to move back and forth, or in the case of fixed installation equipment, it is used to transmit signals and data, so the servo motor needs to be strictly protected by water and oil, so as to ensure the reliable operation of the cable. Provide a good environment.
2. Secondly, the bending radius of the cable should be maximized. At the same time, during the installation and use, the relevant operator must fully grasp the minimum bending radius of the cable, so that any operation must not exceed the minimum value.
In the process of use, it is necessary to reduce the stress of the cable as much as possible, especially at the connection or exit of the cable. It must be ensured that the cable does not generate torque due to bending pressure from the outside, or receives vertical compliance of its own weight. The phenomenon of broken damage occurs.
3. Finally, if you need to move the servo motor, you need to fix the cable connected to the motor configuration to a part that is stationary relative to the motor, and extend the cable with the additional wires in the cable holder. This ensures that the cable does not have to bend too much during the movement of the motor, thus greatly ensuring the complete reliability of the cable.
